Product Description

JIS G4051 SNCM439 Steel Bar Chemical composition

JIS G4051 SNCM439 Steel Bar, SCM439 steel round bar, EN24 steel round bar, 4340 steel round bar is a medium carbon, low alloy steel known for its toughness and strength in larger sections. SNCM439 is also a nickel-chromium-molybdenum steel. SNCM439 has higher strength, ductility, toughness, creep resistance and fatigue resistance than most other steels. The alloy achieves a high degree of hardenability, with HRC hardness ranging from 24 to 53, depending on heat treatment. High toughness and strength in the heat-treated state.

Alloy SNCM439 steel is usually hardened and tempered in the tensile range of 930 – 1080 Mpa. Pre-hardened and tempered 4340 steel can be further case hardened by flame or induction hardening and nitriding. SNCM439 steel has good impact and impact resistance as well as wear and abrasion resistance in the hardened state. AISI 4340 steel has good ductility in the annealed condition and can be bent or formed. SNCM439 materials are typically used where other alloy steels do not have the hardenability to provide the required strength. It is an excellent choice for high stress parts. AISI 4340 alloy steel can also be machined by all conventional methods.

1. SNCM439 steel equivalent material:

GB	JIS	ASTM/AISI/SAE
40CrNiMo(A)	SNCM439	4340

2. SNCM439 steel Chemical composition:

	C	SI	MN	S	P	Cr	Mo	Ni
40CrNiMo(A)	0.37-0.44	0.17-0.37	0.50-0.80	0.035 (max)	0.035 (max)	0.60-0.90	0.15-0.25	1.25-1.65
SNCM439	0.36-0.43	0.15-0.35	0.60-0.90	0.030 (max)	0.030 (max)	0.60-1.00	0.15-0.35	1.65-2.00
aisi 4340	0.38-0.43	0.15-0.35	0.60-0.80	0.035 (max)	0.035 (max)	0.70-0.90	0.20-0.30	1.65-2.00

3. SNCM439 steel Mechanical Properties:

Yield Strength(MPa)	Tensile Strength(MPa)	Elongation(%)	AKV
835(min)	985(min)	12(min)	55(min)

Note: The mechanical properties can be adjusted according to heat treatment based on your requirement.

4. SNCM439 steel applications:

SNCM439 steel is used in most industrial sectors for applications requiring higher tensile/yield strength than 4140 steel.
Some typical applications are: aircraft landing gear, automotive, oil and gas drilling, forging, hot and cold forming, machine building, transmission systems such as power transmission gears and shafts.
General engineering industry and structural use applications such as: heavy duty shafts, gears, axles, spindles, couplings, pins, chucks, molds, etc.